

搜索





Product

Your location:

Home

Product

Solar Mounting System

Solar home power generation system

Photovoltaic power generation is a technology that uses the photovoltaic effect of the semiconductor interface to directly convert light energy into electrical energy. The key element of this technology is the solar cell. After the solar cells are packaged and protected in series, a large-area solar cell module can be formed, and then combined with the power controller and other components to form a photovoltaic power generation device.

Keywords

Solar home power generation system

Category

Solar Mounting System

SEND E-MAIL

CONSULTATION

Product Description

Parameters

· Less geographically restricted

· Short construction period

· It is safe and reliable, noise-free, low pollution, no fuel consumption and erection of transmission lines

Household power generation systems are generally composed of photovoltaic arrays, solar charge and discharge controllers, battery packs, off-grid inverters, DC loads and AC loads composed of solar cell modules. If the output power supply is AC 220V or 110V, an inverter also needs to be configured. The photovoltaic array converts solar energy into electrical energy in the presence of light, supplies power to the load through the solar charge and discharge controller, and charges the battery pack at the same time; In the absence of light, the DC load is powered by the battery pack through the solar charge and discharge controller, and the battery must also directly supply power to the independent inverter, which is reversed into AC power through the independent inverter to supply power to the AC load.Photovoltaic power generation is based on the principle of photovoltaic effect, using solar cells to directly convert solar energy into electricity. Whether it is independent use or grid-connected power generation, photovoltaic power generation system is mainly composed of solar panels (components), controllers and inverters three parts, they are mainly composed of electronic components, do not involve mechanical components, so photovoltaic power generation equipment is extremely refined, reliable and stable long life, easy installation and maintenance. Theoretically, photovoltaic power generation technology can be used in any occasion that needs power supply, from spacecraft, down to household power supply, to megawatt-level power stations, small to toys, photovoltaic power everywhere.

Components	5KW-OFF	10KW-OFF	10KW-OFF	20KW-OFF	25KW-OFF
550W Solar Panel	6 Pieces	10 Pieces	14 Pieces	18 Pieces	22 Pieces
Inverter and GEL Battery	5kw	10kw	15kw	20kw	30kw
Lithium Battery	5kw	10kw	15kw	20kw	30kw
DC Cable	200 Meters	200 Meters	200 Meters	400 Meters	400 Meters
MC4 Connector	4 Pairs	4 Pairs	6 Pairs	6 Pairs	10 Pairs

Scan the QR code to read on your phone

None

Home solar power generation system

More Products

Solar carport system
Photovoltaic carport, which can not only realize all the functions of a traditional carport, but also generate electricity to the owner Bring benefits. Generally, steel structure brackets are adopted, which are simple, generous, fashionable, beautiful, and clean and environmentally friendly new energy, effectively alleviating the environmental and energy pressure of society.
Solar home power generation system
Photovoltaic power generation is a technology that uses the photovoltaic effect of the semiconductor interface to directly convert light energy into electrical energy. The key element of this technology is the solar cell. After the solar cells are packaged and protected in series, a large-area solar cell module can be formed, and then combined with the power controller and other components to form a photovoltaic power generation device.
Home solar power generation system
Photovoltaic power generation is a technology that uses the photovoltaic effect of the semiconductor interface to directly convert light energy into electrical energy. The key element of this technology is the solar cell. After the solar cells are packaged and protected in series, a large-area solar cell module can be formed, and then combined with the power controller and other components to form a photovoltaic power generation device.
Single Axis Solar Tracker system
Flat single-shaft photovoltaic supporting bracket is suitable for low latitudes. It usually tracks the height angle of the sun to increase the vertical component of the solar rays on the battery panel to increase its generating capacity. It is divided into north-south axis tracking and east-west axis tracking. The east-west axis tracking has no obvious advantages over fixed inclined installation, and the tracking effect of north-south axis is better than that of east-west axis. The flat single-shaft photovoltaic supporting bracket has one shaft to automatically track the sun in the east-west direction every day with simpler structure, ingenious assembly and strong terrain adaptability. The rotating parts are made of stainless steel, which are maintenance-free and have a design life of more than 25 years.
Dual Axis Solar Tracker system
The structure of the dual-axis tracking system is divided into a support part, a connecting part and a transmission part. The support part of the dual-axis tracking system is composed of the main pillar, the rotating support and the steel structure bracket, the connecting part is composed of aluminum profiles and bolts, and the transmission part is composed of worm gear, connecting members, reducers, etc. The dual-axis tracking system tracks two directions, horizontal rotation and vertical pitch, to achieve dual degrees of freedom tracking. Motor power input, through the reducer deceleration, input worm gear, the vertical plane of the rotary motion into the horizontal plane of the rotary motion, at the same time the position sensor real-time collection of the rotation angle of the system, for the electronic control input real-time data, so as to achieve the horizontal rotation direction of automatic tracking.
Single Axis Solar Tracker system
Flat single-shaft photovoltaic supporting bracket is suitable for low latitudes. It usually tracks the height angle of the sun to increase the vertical component of the solar rays on the battery panel to increase its generating capacity. It is divided into north-south axis tracking and east-west axis tracking. The east-west axis tracking has no obvious advantages over fixed inclined installation, and the tracking effect of north-south axis is better than that of east-west axis. The flat single-shaft photovoltaic supporting bracket has one shaft to automatically track the sun in the east-west direction every day with simpler structure, ingenious assembly and strong terrain adaptability. The rotating parts are made of stainless steel, which are maintenance-free and have a design life of more than 25 years.
Dual Axis Solar Tracker system
The two-shat photovoltaic supporting bracket system has two rotating shafts operating simultaneously, which can ensure that the solar panel is always perpendicular to the solar rays. Therefore, two-shaft tracking can increase solar generating efficiency relatively high. In case of gale, it can be adjusted to the horizontal direction to increase the wind resistance and ensure the safety of the system. It also has a simple structure and the installation and maintenance is more convenient. It can track the sun automatically every day, which can increase power generation by 30% to 40%.